Which concrete mixing station has the best performance in comprehensive use?
The forced mixer is the main stream used in the mixing station at home and abroad. It can stir a variety of concrete, such as fluidity, semi dry and dry, and so on. Compulsory mixer in the form of the structure as the main planetary mixer, single horizontal shaft mixer and twin shaft mixer, the comprehensive performance especially in the twin shaft compulsory mixer best.
Secondly, material weighing system: material weighing system is the key component that affects the quality of concrete and the cost of concrete production. It is mainly divided into three parts: aggregate weighing, powder weighing and liquid weighing.
The next is the material delivery system: material delivery is composed of three parts. Aggregate delivery: at present, there are two ways of conveying hopper and belt conveying in the mixing station. Powder conveying: the commonly used conveying method of powder is conveyer of screw conveyor. The advantages of spiral conveyer are simple structure, low cost and reliable use. Liquid transportation mainly refers to water and liquid admixtures, which are transported by water pumps.
Furthermore, material storage system: the storage of materials available for concrete is basically the same. The aggregate is piled up in the open air (there are also closed silos in the large commercial concrete mixing station), the silos are stored in the fully enclosed steel structure silos, and the admixtures are stored in steel structure containers.
The thick wall of the concrete mixing station will bring the burden to the machine itself, and increase the energy consumption while increasing the bearing capacity of the frame. Some users with concrete mixer and mixing concrete mixing but not the user, some relatively soft material, such as feed, feed and did not wear too much, so the cylinder wall concrete mixing machine is no need to be too thick, it is not to say that for any user tube wall thickness is good, the most important is suitable.
