When purchasing a concrete mixing station, you must fully understand the manufacturer’s qualifications

When purchasing a concrete mixing station, you must fully understand the manufacturer's qualifications and the detailed parameters of the equipment. Among the many manufacturers, there are many small manufacturers. Due to the inability to afford the production cost and the limitation of technical level, on the one hand, the equipment technology is not up to standard, and on the other hand, there is also the phenomenon of cutting corners. If customers purchase this kind of equipment, they often cannot guarantee the safe production of the project and will bring a lot of unnecessary trouble to the customers.

Due to different technical processes, the production cost of the equipment will also be different. The same hzs50 stabilized soil mixing station has different dust-proof and noise-proof measures, and the prices also vary widely. Nowadays, stabilized soil mixing stations are required to develop green, and new environmentally friendly equipment has gradually entered people's field of vision. Among these many new types of equipment, there are many manufacturers whose technical skills are not perfect, causing unnecessary losses to customers.

During the construction of stabilized soil mixing equipment, the curing agent should be mixed strictly according to the predetermined ratio, and measures should be taken to prevent segregation. Lifting should ensure the flatness of the lifting equipment and the verticality of the guide. When forming piles, it is necessary to control the lifting speed and frequency of the stabilized soil mixing equipment to ensure continuous and uniform grouting, so as to control the amount of grouting and ensure uniform mixing. At the same time, pumping must be continuous.

When the stabilized soil mixing equipment is pre-stirred and sinking, it is not suitable to flush with water. When the hard soil layer sinks too slowly, an appropriate amount of water can be flushed. However, the impact of flushing into piles on the strength of the pile body should be considered. All cement used should be screened, the prepared slurry must not segregate, and pumping must be continuous.

The number of tanks for mixing cement slurry, the amount of cement and external admixtures, and the time for pumping the slurry should be recorded by a dedicated person; the amount of shotcrete and the mixing depth must be automatically recorded using monitoring instruments certified by the national metrology department. When the cement slurry reaches the slurry outlet, it should be sprayed and stirred for 30 seconds. After the cement slurry and the soil at the pile end are fully mixed, the stirring head should be lifted.