Learn about the specific applications of precast concrete components

Introduction to the specific application of precast concrete component double T slabs

When it comes to precast concrete component double T slabs, many people will think that this material can only be used for installation products. In fact, this is relatively one-sided. This material still has many other applications. Let’s learn more about it below.

Specific applications of precast concrete component double T slabs:

(1) The applications of double T flat panels in the construction industry are mainly in sealants, adhesives, roof waterproofing and insulation layers, cold storage installations, interior and exterior wall coatings, floor paints, synthetic wood, runways, waterproofing and leak-proofing agents, and plastic floors.

(2) Furniture industry applications: Double T flat panels are mainly used in paints, adhesives, coatings, sofas, mattresses, and seat armrests in the furniture industry.

(3) Application in the sports industry: Double T flat panels are used in the sports industry for plastic sports venues, sportswear, sports shoes and scooters.

(4) Applications in the transportation industry: Double T flat panels are used in the transportation industry for aircraft, automotive interior parts, seats, armrests, door inner panels, instrument panels, bumpers, steering wheels, shock absorbing pads, carpet linings, paints, pipes, and fenders.

The above are the specific applications of precast concrete double T slabs in other industries. I hope it will be helpful to you.

In the factory, precast prestressed concrete double T panels are commonly used. Long-line pedestals of 60 to 150 meters and pre-tensioning method are used to produce formwork. Steel molds or concrete tire molds can be used. The rib width, rib height, plate and the overhanging part of the plate are often made adjustable and changeable. Special molding machines can be used for pouring, vibrating and calendering concrete. The components can be maintained by circulating heat medium in the mold cavity. Using the same pedestal and formwork, prestressed or non-prestressed concrete double T-slabs of different spans and sizes can be produced. It can also be changed to produce grooved boards, or the formwork can be separated longitudinally to produce single T-slabs. One mold can be used for multiple purposes and is more flexible.

Concrete double T slabs generally weigh about 0.6 to 0.9 tons per meter, and suitable flatbed trailers and cranes can be used for transportation and hoisting.

The prefabricated reinforced concrete load-bearing member combined with slabs and beams consists of a broad panel and two narrow and high ribs. Its panel is both a transverse load-bearing structure and a compression zone for longitudinal load-bearing ribs.

In the factory, precast prestressed concrete double T panels are commonly used. Long-line pedestals of 60 to 150 meters and pre-tensioning method are used to produce formwork. Steel molds or concrete tire molds can be used. The rib width, rib height, plate and the overhanging part of the plate are often made adjustable and changeable. Special molding machines can be used for pouring, vibrating and calendering concrete. The components can be maintained by circulating heat medium in the mold cavity. Using the same pedestal and formwork, prestressed or non-prestressed concrete double T-slabs of different spans and sizes can be produced. It can also be changed to produce grooved boards, or the formwork can be separated longitudinally to produce single T-slabs. One mold can be used for multiple purposes and is more flexible.